Is the creek warmer downstream, or was it just later in the day?
· SPCWC editorial team · Worked example and worksheet
At eight in the morning the upstream station reads 12.2 °C. At two in the afternoon the downstream station reads 14.1 °C. Subtracting gives 1.9 °C. Put that number on a map as “warming between stations” and a reader will miss an important detail: the two dots show different places and different hours.
1. Read across the same row
The two-station temperature worksheet contains a fictional one-day record. Both stations use the same method, units, local clock and logging schedule. The question is how their temperatures differed at each recorded time. Start by subtracting upstream from downstream within each row.
| Local time | Upstream | Downstream | Difference |
|---|---|---|---|
| 08:00 | 12.2 | 12.8 | +0.6 |
| 11:00 | 13.1 | Missing | — |
| 14:00 | 14.0 | 14.1 | +0.1 |
At both matched times, the downstream instrument recorded the higher value. The recorded gap was smaller in the afternoon. A tenth of a degree on the display is a difference in the readings. To decide whether the instruments can reliably distinguish it, check their accuracy and calibration records. For a real comparison, start with the site IDs and method recorded for each visit.
2. Keep the 11:00 row even though the pair is incomplete
The downstream logger has no 11:00 entry. A nearby reading from 14:00 cannot answer what the gap was at eleven. Keep the upstream reading for anyone studying that station alone. Leave the difference blank and document what is known about the gap. The missing-reading codebook shows how to distinguish a documented equipment failure from an unexplained blank.
3. Check what lies between the stations
In this example the reach notes mention a tributary between the instruments and afternoon shade at the lower sensor. They give no tributary temperature, flow measurement or shade duration. Those notes tell the next observer what to investigate. They cannot tell us how much either feature contributed to the 0.6 °C gap.
The USGS stream-temperature monitoring guide describes how sunlight, groundwater and tributary inflows affect temperature. USGS also documents why the time of a spot temperature reading matters. Compare clock settings, sensor placement and exposure before interpreting a difference. Matching the clocks answers a simultaneous-station question. Following one parcel of water downstream would also require estimating its travel time.
4. Give the reader the two differences and their limits
A caption for this worksheet could read: “The downstream station recorded 0.6 °C more at 08:00 and 0.1 °C more at 14:00. There was no downstream record at 11:00. The cause of the differences is undetermined.” Someone can check every number against the table. Claims about the whole day, a discharge or conditions in another creek would require additional observations.