Before the creek visit, decide who can take a sample
· SPCWC editorial team · Worked example and worksheet
At the meeting point, a volunteer holds up an empty bottle and asks, “Should I fill this if the water looks cloudy?” The field lead needs a better answer than “we’re here to monitor the creek.” Reading a gauge from a designated path, describing what you see and collecting a sample are different assignments. This briefing card gives each one an owner before anyone sets off.
1. Read what the organizer actually describes
In Santa Clara County, Valley Water’s Adopt-A-Creek requirements describe scheduled cleanups on adopted reaches. The page identifies private access as one reason a reach can be unavailable. Grassroots Ecology describes water-quality monitoring on local creeks, including Stevens Creek. The two pages answer different questions. A cleanup invitation tells you where to ask about that cleanup. To join monitoring, check the specific monitoring organizer’s assignment, location and method.
Give the group a meeting-point description, the person leading the visit, the tasks available and any access arrangements before they travel. The field-day planning guide covers walking distance, breaks and alternatives for people who prefer a stationary role.
2. Put one action on each line of the card
For a fictional visit, the lead has assigned an observer and a recorder to a marked viewpoint. The observer can describe surface color. The recorder can note the time and vantage point. Nobody has been assigned to collect water. On the card, enter “collection unassigned” beside the bottle question and leave the sample ID empty. If someone later asks for a laboratory result, the record explains why none exists.
For a visit that really includes collection, ask the project lead to identify the person trained for the task, the approved site and method, and where the resulting sample and paperwork go. Enter the reference the lead gives you. The US EPA’s volunteer monitoring manual explains how volunteer programs organize safety, training and monitoring procedures. The current project lead supplies the instructions for this visit.
3. Rehearse three changes before leaving
- The water looks cloudy. From the agreed safe viewpoint the observer can describe the appearance. The recorder keeps the observation with its time and location. Color alone cannot identify a substance or supply a concentration.
- The viewpoint is closed. Stop at the closure. Record “viewpoint unavailable” and ask the lead about another visit. A photograph from a different reach would need its own location and purpose.
- Someone brings a sample bottle. Check the assignment. In this exercise no sampler or approved method is named, so the bottle stays empty. Record the question for the lead. An unused bottle needs no invented sample number.
4. Hand the recorder’s notes to the lead
Ask the recorder to read back the observation, any task left undone and the person following up. In the example there is one visual observation, one access issue and one unassigned collection request. There are zero samples. Keep that last count out of any column for measured concentrations. The monitoring records guide shows how to keep the site and method attached to later entries.
Download the three-scenario briefing card (CSV). Replace the fictional assignments with those confirmed by your own project lead.